Why a circle on a map is not enough
Many owners draw a circle of three or five kilometres and stop. But ten minutes on a clear road is not ten minutes through a busy junction.
Guests care about how long the food takes, and how it tastes when it arrives. So plan around time and quality. Distance is only a rough guide.
Step 1: set your food quality window
Every dish has a time after which it is no longer good. Fried food gets soft. Ice cream melts. Biryani is more forgiving than a crisp dosa.
| Dish | Good for how long in the box (minutes) | Travel risk |
|---|---|---|
| Dal and rice | 40 | Low |
| Crisp dosa | 20 | High, goes soft |
| Cake slice | 30 | Medium, shakes and melts |
| Ice cream | 15 | Very high |
Test your own dishes by packing them and waiting. The shortest window among your top sellers sets the outer edge of your area, unless you change the menu for far orders.
Step 2: draw bands by travel time
- Mark your restaurant on a map.
- Ride the main routes at lunch and dinner and note the minutes.
- Mark the points that are 10, 20 and 30 minutes away at busy hours.
- Join the points to make three bands. Call them near, middle and far.
- Remove any area that needs a long, risky road or a very busy junction.
- Write the bands as a list of areas and landmarks guests know, not only as kilometres.
The delivery radius planner can help you test a radius against your own numbers.
Step 3: check rider capacity
A rider can only carry so many orders in an hour. If you accept more orders than your riders can run, every guest waits.
Work it out from your own trips: how long one round takes, including pack, ride, hand-off and return.
An example with made-up numbers
- Near band round trip: 20 minutes, so one rider does 3 trips an hour.
- Middle band round trip: 35 minutes, so one rider does about 1.7 trips an hour.
- Far band round trip: 55 minutes, so one rider does about 1.1 trips an hour.
- With two riders in the busy hour, you can send about 6 near trips or about 3 middle trips.
- If more orders arrive, pause the far band for that hour.
Step 4: minimum order and charge by band
The farther the trip, the more it costs you. Use the minimum order and the delivery charge to cover that. You set both, so base them on your own cost per trip.
| Band | Travel time (minutes) | Minimum order (rupees) | Delivery charge (rupees) |
|---|---|---|---|
| Near | up to 10 | 200 | 20 |
| Middle | 11 to 20 | 350 | 40 |
| Far | 21 to 30 | 500 | 70 |
To set the charge, take your cost per trip, such as rider pay and fuel, and decide how much you want guests to carry. A free delivery band must be paid for by the food margin.
Step 5: tell guests clearly
- Show the areas you serve in words on your page and bag cards.
- Show the minimum order and charge before the guest pays.
- Give an honest delivery time for each band.
- Say what happens when you are too busy: the time is longer or the far band is closed.
- Never hide a charge until the last step.
A clear promise you keep is better than a short promise you miss.
Step 6: review the area
Your first plan is a guess. Review it with real data.
- Every week: count late orders by band.
- Every month: look at the profit per order by band, after rider cost.
- If a band has many late or cold orders, shrink it or raise its minimum.
- If a band runs smoothly and has spare rider time, test opening a little further.
- Note holidays, rain and match days, because travel time changes on those days.
What to do this week
- Test three top dishes and note how long each stays good.
- Ride your three main routes at a busy hour and write down the minutes.
- Draw your near, middle and far bands.
- Set a minimum order and a charge for each band using your cost per trip.
- Write the plan on one sheet and share it with your riders.